Origin	China
Model Number	TEMPer8k
Brand Name	RDing
Theory	Temperature Recorder
Usage	Indoor

The TEMPer8K is same with TEMPerA or TEMPerB except for memory and battery

Thank you for purchasing the Thermograph product. Please read through the using instruction to know how to operate the device and to protect it.

1.    Description

The thermograph is a miniature stand-alone device that can record temperatures of equipment and environment accurately by using the metal shell. And it can store the data for a long time. You can connect it to computer by the USB port to operate, and it also can use offline. It can use for collect temperature data in transportation and storing of chemical, food, environment researching and so on.

1.    Function peculiarity

l  Range of measuring:

TEMPerA : -40~+80  Degree Centigrade  /  -40~+176 Degree Fahrenheit

TEMPerBï¼Âš-40~+150  Degree Centigrade  /  -40~+302 Degree Fahrenheit

TEMPerCï¼Âš0~+1000  Degree Centigrade  /  32~+1832 Degree Fahrenheit

l   Level of waterproof : IP*7

l   Battery : Li battery 60mAH, 3.7 V

l   Memory capability : 8000 items

l   Recording interval : between 1 second to 255 hours

l   Indication of LED signal: When the battery is charging up the green LED flashing; when the device is working normally, the red LED flashing; when there is an abnormal state or delay to start work, the blue LED flashing.

l   Battery standby time: between 1 to 5 months

l   Outer power supply: support

l   Life: Record times >100.000, data retention > 40 years, battery rechargeable and re-dischargeable > 500 times.

l   Keep data secret and user management function.

2.    Install instruction

Software install:

a)    Install USB driver : put the CD into the computer driver, running the USB driver\setup.exe

b)    Install the framework : running the thermograph\DotNetFX\DotNetFX.exe

c)    Install the application : running the thermograph\ setup.exe

d)    Finished install: running the thermograph.exe on the desktop. When finished install, the system will clue on you to choose the language.

Hardware install:

Put the thermograph into the USB port of a computer, and do under the clue of the system. If you insert the device correctly, there will be a red and green LED flashing in turn, and the system will emit a right guiding sound. The battery will be recharge automatically after being inserted into the USB port, and the green LED will flash.

3.    Operating instruction

a)    Running the thermograph software, and login. The first login password is “aaaa”. Connect the thermograph to the computer, you must sure it is connected success to do the next operation. If the thermograph is connected success, you can see the voltage and electricity of the battery showed on the lower left quarter of the window. See on the picture below.

Please note that if you key in a wrong password, the system will mind you “Forget password?”, click it will ask weather you want to renew the first login password. If you click “yes”, the system will restore the password to be “aaaa”, but the data which stored in the device will be lost at the same time. In order to protect your device from being damaged by others, you can set “restore password disable” in the setting part. Besides, please check the quantum enough or not before use it to record the temperature.